| Rapid Current Limit | To avoid frequently over current faults of the frequency inverter. |
| Torque Limit and Control | It can limit the torque automatically and prevent frequently over
current tripping during the running process. Torque control can be
implemented in the VC mode. |
| High Performance | Control of asynchronous motor and synchronous motor are implemented
through the high-performance current vector control technology. |
| Virtual I/O | Five groups of virtual DI/DO can realize simple logic control. |
| Timing Control | Time range: 0.0~6500.0 minutes |
| Motor Overheat Protection | The optional I/O extension card enables AI3 to receive the motor
temperature sensor input (PT100, PT1000) so as to realize motor
overheat protection. |
| Multiple Encoder Types | It supports differential encoder, open-collector encoder |
| Protection Mode | Motor short-circuit detection at power-on, input/output phase loss
protection, over current and overvoltage protection, less voltage
protection, overheat protection and overload protection,etc |
| Running Command Giving | key panel; Control terminals; Serial communication port; You can
switch between these giving in various ways. |
| Frequency Giving | There are 10 kinds frequency giving: digital setting, analog
voltage setting, analog current setting, pulse setting and serial
communication port setting. |
| Programmable Digital Input | 6 digital input (DI) terminals, one of which supports up to 100 kHz
high-speed pulse input |
| Programmable Analog Input | 3 analog input (AI) terminals, AI1,AI2 support 0V~10 V or 0mA~20mA
input, AI3 support -10V~+10V |
| Programmable Open Collector Output | 1 FMP output terminal, that supports 0–100 kHz square wave signal
output (Can be used as DO output) |
| Programmable Analog Output | 2 analog output (AO) terminals, both of them supports 0mA~20mA
current output and 0V~10V voltage output. |
| Relay Output | 2 relay output terminal (2.2KW and below only have 1 relay output
terminal) |
| Installation Location | Indoor, no direct sunlight, dust, corrosive gas, combustible gas,
oil smoke, vapour, drip or salt. |
| Altitude | Lower than 1000m |
| Ambient Temperature | -10°C~ +40°C (de-rated if the ambient temperature is between 40°C
and 50°C) |
